Difference between revisions of "Infrastructure/installation/guide"
|Line 1:||Line 1:|
= Software and Data Installation Guide =
= Software and Data Installation Guide =
= Version history
= Version history
Revision as of 10:44, 8 November 2017
Software and Data Installation Guide
Version Date Note 0.1 2017-04-26 Initial draft by trz 0.2 2017-05-20 Added information on modules and accessing shared storage space, cleaned up doc (moving future topics to section at the end) 0.3 2017-05-31 Small fixes; 1st version to be used as guidelines
Guidelines to install software and data at resources provided within the Nordic Language Processing Laboratory.
Taito is a cluster operated at CSC (Finland). User documentation is available at https://research.csc.fi/taito-user-guide. Each user has access to different areas for storing files: $HOME with a quota of 50 GB, $USERAPPL with a quota of 50 GB, and a project area (see below) under /proj/nlpl/ (access via CSC storage project for NLPL managed by Stephan Oepen).
Abel is a cluster operated at UiO (Norway). User documentation is available at http://www.uio.no/english/services/it/research/hpc/abel/help/user-guide/. Each user has access to different areas for storing files: $HOME with a quota of 500 GB, and a project area under /projects/nlpl/ (access via UNIX group hpc-nlpl managed by Stephan Oepen).
The software environment of the laboratory shall be as uniform as possible from a user perspective. The software environment is comprised of libraries and applications installed system-wide or in a space specific for the laboratory. System-wide libraries and applications are not considered at the current stage; their installation can be requested through the firstname.lastname@example.org task force.
Laboratory-specific software is stored in a location referred to as $NLPL_SOFTWARE which points to /proj/nlpl/software/ and /projects/nlpl/software/ for Taito and Abel, respectively.
Under $NLPL_SOFTWARE on each system, applications and libraries are stored with the following directory layout:
where __APPNAME__ contains only lower case symbols (with some exceptions such as R) and __APPVERSION__ contains the version of the software (as provided by its vendor).
For each installation, there should be a README file (or page on the wiki) documenting the exact versions used (and how to obtain them) and the steps used to build the software. The infrastructure task force will soon make a proposal for how to manage installation scripts and notes in an NLPL-associated version control system.
Optionally, for each software that is installed the sources and build scripts (if adjusted to the NLPL environment) can be stored under $NLPL_SOFTWARE/sources/. This directory should be ‘cleaned up’ after the installation and possibly compressed. If possible, it may be useful to create a log file of the complete installation session and preserve that file (in compressed form).
The user environment on Abel and Taito is configured using the so-called modules system which abstracts actual installation paths and sets certain environment variables in a standardized form. For each installed software component, there should be a module definition file under $NLPL_SOFTWARE/modulefiles/__APPNAME__/__APPVERSION__ See the separate section on the modules system below for further details on the definition files.
At start only limited documentation will be available through the modules system. A later version of this guide will recommend best practices for documentation.
The data sets provided by NLPL shall be presented as uniformly as possible from a user point perspective. The data set environment is predominantly comprised of freely available data. Restricted data sets are not considered at the current stage (see the section on Open Questions below).
Data sets shall be installed under $NLPL_DATA which points to /proj/nlpl/data/ and /projects/nlpl/data/ for Taito and Abel, respectively. The top-level data directory is sub-divided by NLPL activities, with sub-directories translation, parsing, corpora, vectors, and opus. In principle, each activity is free to decide on the directory layout within their sub-directory, where it may or may not be most practicaly to organize according to languages, for example. Where language identifiers are part of directory or file names, they should follow the three-letter ISO codes. Here as elsewhere in the NLPL directory space, upper-case letters shall be avoided in file and directory names (except maybe for de-facto standard names like Makefile or README).
The Modules System
At start only limited documentation will be available through the module system. A subsequent version of this guide will recommend best practices for documentation. Modules Modules (command line tool module) allow for a simple and common way of configuring a user's environment to get access to executables, libraries, development files, data sets, etc.
The most essential commands are
- module avail
- Shows which modules are available.
- module list
- Shows which modules have been loaded.
- module load name/version
- Loads module with name name and version version.
- module rm name/version
- Unloads module with name name and version version.
- module purge
- Unloads all modules.
- module show name/version
- Shows the definition of the module.
- module whatis name/version
- Shows a brief information on what this module provides (for Abel).
- module help name/version
- Shows a brief information on what this module provides (for Taito).
- module use -a PATH
- Append PATH to the search path for module definition files.
Modules are defined with (short) text files using Tcl and Lua on Abel and Taito, respectively. For modules specific to the laboratory, these files shall be stored under the abovementioned directory layout (see the sections on Software and Data Sets). Integrating modules in the system requires the directory containing these files be included in the search path of the module system (see module use -a above). For example, include the command
module use -a $NLPL_SOFTWARE/modulefiles
in your .bashrc on Abel and Taito with the correct, system-specific value for $NLPL_SOFTWARE (see above).
- How to provide documentation (on http://www.nlpl.eu)
- How to test/validate a software that it actually works (e.g. by someone else than the one who has installed it ... based on the provided documentation)
- How to test software to ensure functional identity across systems
- How to sync data sets across systems
- Pick VCS to maintain installation scripts and notes.
- Handling of data sets with access restrictions
|0.2||2017-05-20||trz||added information on modules and accessing shared storage space, cleaned up doc|
|0.3||2017-05-31||trz||small fixes; first version to be used as guidelines|
|0.4||2017-11-06||oe||updates from the infrastructure task force|